K-Type Thermocouple Wire Sensor Digital Thermometer Probe Fiber Glass PK700 12'

Description

12 ft long K-Type Thermocouple for Digital Thermometers  PK-700
-320 to 1292°F    (-200 to 700°C)
This is a reliable thermocouple wire with a K-Type sensor. The k-type sensor is at the tip of a 12 ft long wire probe, which has a high temperature fiberglass insulation, good up to 1292 degree Fahrenheit
°F
or 700 degree Celsius
°C
. The fiberglass is secured with thin thermocouple wire, not with a plastic shrink tube (which could melt at the high temperature).
The thermocouple has a miniature type connector (2 flat blades) that will work with digital K-type thermometers of many manufacturers (Nicety, Fluke, Extech, Omega). This thermocouple probe can be used to measure air or gas temperature, non corrosive liquids and the sensor can be attached to pipes or embedded into objects you want to measure.
This thermocouple will read very low temperatures, if you have a suitable thermometer. I have tested this down to -350°F (-210°C) with my thermometer DT1311 and DT1312. The k-type thermocouple thermometers DM6801 and DM6892 only measure to -58°F.  The miniature K-type thermocouple connector can easily be opened and you can shorten the wire if desired.
Specification:
Thermocouple: K-Type ( chromel / alumel )
Temperature Range:
-320 to 1292 °F     (-200 to 700 °C)
Wire length: approx. 12 ft / 400 cm
Probe Diameter: 0.06 inch (1.6mm)
Miniature K-Type connector, can be opened if you want to shorten wire
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.